Leaching Characteristics of Fly Ash from Thermal Power Plants of Soma and Tunçbilek, Turkey

Use of lignite in power generation has led to increasing environmental problems associated not only with gaseous emissions but also with the disposal of ash residues. In particular, use of low quality coal with high ash content results in huge quantities of fly ash to be disposed of. The main problem related to fly ash disposal is the heavy metal content of the residue. In this regard, experimental results of numerous studies indicate that toxic trace metals may leach when fly ash contacts water. In this study, fly ash samples obtained from thermal power plants, namely Soma and Tunçbilek, located at the west part of Turkey, were subjected to toxicity tests such as European Committee for standardization (CEN) and toxicity characteristic leaching (TCLP) procedures of the U.S. Environmental Protection Agency (U.S. EPA). The geochemical composition of the tested ash samples from the power plant show variations depending on the coal burned in the plants. Furthermore, the CEN and TCLP extraction results showed variations such that the ash samples were classified as `toxic waste' based on TCLP result whereas they were classified as `non-toxic' wastes based on CEN results, indicating test results are pH dependent.     

Clarifying relationships between participatory approaches,issues, processes,and results,through crosscutting case analysis in Japan’s environmental,energy, and food policy areas

Participatory public engagement approaches such as Consensus Conferences, Deliberative Polling^®, and Planning Cells have been used to try and resolve environmental disputes in Japan; however, the strengths and weaknesses of these approaches have not been analyzed adequately or comprehensively. This paper evaluates practical applications of each of the above participatory approaches and conducts a crosscutting analysis of these applications to evaluate how effectively each approach provides scientific information to participants and to consider how the quality of deliberations that occur during these processes affect their outputs. Based on existing classification of participatory processes, and methodology for public involvement in US environmental decision-making, this study compares and contrasts the processes and outcomes of 25 participatory planning case studies in Japan. After compiling a case inventory of participatory approaches, the features of one approach are documented using qualitative analysis, and the aspects of four other approaches are confirmed using crosscutting analysis. In so doing, the likely strengths and weaknesses of each approach are suggested as follows. When discussions require an understanding of scientific knowledge, the Consensus Conference tends to be more suitable than the DP approach. If the consensus of participants is expected, the Consensus Conference is also thought to be suitable. But through a DP process or Simplified Planning Cells approach, we can know the quantitative portion of each opinion through results of ballots. In sum, new participatory approach that incorporates strengths of the Consensus Conference and the Simplified Planning Cells into Local Environmental Planning is needed. Thus, the quality of consensus building could be improved.     

Catalytic decomposition of hydrocarbon into hydrogen and carbon in a spouted-bed reactor as the second-stage reactor of a plastic recycling process

A two-stage process for the chemical recycling of plastics is proposed. In this process, which consists of two reactors, plastics are converted into hydrogen and carbon. In the first reactor, plastic chips are thermally decomposed into hydrocarbons. In the second reactor, the hydrocarbons formed in the first reactor are catalytically decomposed into carbon and hydrogen. In this study, in order to obtain basic data for the second reactor, propene was catalytically decomposed in a laboratory-scale spouted-bed reactor (600mm high, 21.6mm internal diameter, made of SUS304). The effect of the type of spouting medium used on the decomposition behavior of propene was investigated using four types of spouting medium (nickel-plated -alumina, palladium-plated -alumina, nickel-impregnated -alumina, and -alumina). The nickel-impregnated -alumina gave the best propene conversion and hydrogen yield.     

Processing and Characterization of Short-Fiber Reinforced Jute/Poly Butylene Succinate Biodegradable Composites: The Effect of Weld-Line

Fabrication of complex injection molded parts often involves the use of multiple gates. In such situations, polymer melts from different gates meld to form the molded part (weld line). This paper reports on the fabrication and characterization of the mechanical and morphological properties of short fiber reinforced jute/poly butylene succinate (PBS) biodegradable composites. The effect of a dual gated mold in the fabrication of welded specimens was a key focus of the investigation. It was observed that incorporation of jute fiber (10 wt%) conferred drastic changes on the stress–strain properties of the matrix as the elongation at break (EB), dropped from 160% in the matrix to just 10% in the composite. The tensile strength of the composite was lower than that of the matrix. However, it is noteworthy that the tensile modulus of the composite increased. Bending test also revealed that both bending strength and modulus increased with the incorporation of jute. Morphological studies of the tensile fracture surface using SEM revealed two types of failure mode. Ductile failure was indicated by plastic deformation at the initiation of fracture followed by brittle failure. The good interfacial bonding indicated between jute and PBS was attributed to positive interaction between the two polar polymers. A comparison of the non-weld and weld-line samples revealed that the weld-line composites have better mechanical integrity than the corresponding polymer matrix with weld line. The results also revealed that elongation at break and toughness are most sensitive to the presence of the weld-line whereas flexural properties are least sensitive.     

Isoprene emission from tropical trees in Okinawa Island, Japan

This study surveyed isoprene emission from 42 indigenous and exotic tropical trees in subtropic Okinawa, Japan. Of the 42 trees studied, 4 emitted isoprene at a rate in excess of 20 μg g⁻¹ h⁻¹, and 28 showed the rates of 1–10 μg g⁻¹ h⁻¹. The remainder emitted less than 1 μg g⁻¹ h⁻¹. The majority of trees in this study may therefore fall within the lower emitting species. However, species in Moraceae that is indigenous in Okinawa emitted isoprene at relatively higher rates with an average of 14.2 μg g⁻¹ h⁻¹. The highest emission rate of 107.1 μg g⁻¹ h⁻¹ for Ficus virgata yielded the area basis rate of 47.4 nmol m⁻² s⁻¹, which is almost equivalent to the rate of high emitting species. Furthermore, a linear relationship between light intensity and isoprene emission was noted with Ficus virgata up to 1700 μmol m⁻² s⁻¹. These findings may show the potential importance of subtropical areas as sources of isoprene to the atmosphere.     

Accumulation of silver in the liver of three species of pinnipeds

Silver in the three species of pinnipeds [northern fur seal (Callorhinus ursinus), Steller sea lion (Eumetopias jubatus), and harbor seal (Phoca vitulina)] caught in the North Pacific Ocean were analyzed using inductively coupled plasma-mass spectrometry, in order to understand accumulation and distribution of silver in pinnipeds. In northern fur seals, relatively high concentrations of silver were observed in the liver and body hair. Some 70% of the silver burden was concentrated in the liver. Hepatic silver concentrations were significantly correlated to age in northern fur seals (r = 0.766, P < 0.001, n = 49) and Steller sea lions (r = 0.496, P < 0.01, n = 28). Levels of silver concentrations per wet weight (microgram g-1) in the three pinnipeds ranged from 0.04 to 0.55 for northern fur seals, from 0.1 to 1.04 for Steller sea lions and from 0.03 to 0.83 for harbor seals. Silver concentrations in liver for all pinnipeds were significantly correlated with mercury, and selenium (P < 0.001). Molar ratios between silver to selenium approximated 1:180 in northern fur seals, 1:120 in Steller sea lions, and 1:60 in harbor seals. The silver-mercury molar ratios were approximately 1:170 in northern fur seals, and 1:80 both in the other species. Increase in silver accumulation in the liver was caused by the retention in nuclei and mitochondria fraction together with mercury and selenium in the cells of northern fur seals.     

Study of the effects of drinking water treatment sludge on the properties of Class F fly ash-based geopolymer

Environmental Science and Pollution Research - Drinking water treatment sludge (DWTS) generated from water treatment plants is a global issue because of the environmental risks it imposes. Managing...     

The effect of the increase in urban temperature on the concentration of photochemical oxidants

An atmospheric dispersion model, where the inputs of meteorological field were calculated using a meteorological model, was used to reproduce the observed air pollution conditions for the typical fine day in summer period, especially the concentration of the photochemical oxidants. As well, the effects of an increase in the urban temperature and VOC emissions on the concentration of photochemical oxidants were also considered. The following conclusions were drawn.The observed air pollution levels were well modeled by the atmospheric dispersion model using in this study, although modeled NO levels were slightly lower than the observed levels. An analysis of the temperature data showed that a 1 °C increase in temperature leads to a maximal photochemical oxidant concentration of 5.3 ppb, which is an increase of 11%. Additionally, the effect on the photochemical oxidant concentration due to an increase in the vegetation-derived VOCs was more than double the effect due to an increase in the photochemical reactions. It was found that the temperature and photochemical oxidant concentration were linearly related up to a temperature increase of 3 °C. When the temperature increases up to 3 °C, the concentration of photochemical oxidants increases by 19 ppb. An analysis of the effect of vegetation-derived VOCs on photochemical oxidant concentrations showed that, the concentration of photochemical oxidants was 30 ppb higher in the afternoon by the effect of vegetation-derived VOCs, so even in metropolitan areas with relatively little vegetation, vegetation-derived VOCs have a strong impact on photochemical oxidant concentrations.     

Oil-Induced environmental Kuznets curve in organization of petroleum exporting countries (OPEC)

This study investigates the environmental Kuznets curve (EKC) hypothesis in 10 of the Organization of Petroleum Exporting Countries (OPEC). To realize the study’s aims a time series model is built based on the period 1977–2008, utilizing the ecological footprint as an environmental indicator and income, labour, capital, oil consumption and oil price as economic indicators. Employing the Autoregressive Distributed Lag (ARDL) approach, by comparing the short and long-run income elasticities, the EKC hypothesis is present in six OPEC countries namely Algeria, Iraq, Venezuela, Nigeria, Qatar and Kuwait. Moreover, the Toda–Yamamoto–Dolado–Lütkepohl (TYDL) causality tests outcome show that, after oil consumption, the most significant factors in increasing ecological footprint are labor and capital. This implies the relocation of pollution intensive industries to almost all of the OPEC countries. However, oil prices reduce environmental damage by its negative effect on the ecological footprint. From the outcome of this study it is important for the investigated countries to reduce their consumption of fossil fuel energy since it represents an important source of pollution. This can be achieved by allocating more labor and capital in projects and investments on renewable energy, energy efficiency and energy saving.     

Assessment of the Water Quality of Troia for the Multipurpose Usages

The aim of this study was to determine the origin and quality of waters in Troia. For this purpose total of 25 water samples including 2 springs, 14 surfaces and 9 groundwaters, were collected at eight different times. Global positioning system (GPS) was used to determine to coordinates of sampling points. The concentration of 6 minor elements (B, Cu, F, Fe, Pb and Zn), 9 major anions and cations (Na(+), Ca(2+), K(+), Mg(2+), SO(4)(2-), PO(4)(3-), HCO(3)(-), Cl(-) and, CO(3)(2-)) were determined by spectrometric, colorimetric and volumetric methods. Water pH, EC, DO, ORP and TDS were measured in situ using probes. The data showed that the concentrations of most of minor elements were below the EPA and TSE limits except Pb which ranged between 0.001 and 4.832 mg L(-1). Statistically significant relationships (P<0.01 and r>0.70) were observed between Fe and Cu, Cu and K(+), Cu and Ca(2+), B and Na(+), Na(+) and K(+). Assessing the water based on irrigation using Wilcox model showed that some well waters were not suitable for irrigation. Troia water was found to be highly corrosive and the average corrosion coefficients varied from 0.5 to 4.6. According to the Piper and Schoeller diagrams results, the water in Troia was classified as mixed water type.